5 1/2" Black & White Vehicle Rear View System
Product Description
5 1/2" Black & White Vehicle Rear View System
The complete package, ready to use system is supplied with all the neccessary fittings. Mount the camera, plug in and switch on!
The System includes a high resolution 5.5" Dash mount or overhead quick start Monitor with a 2 camera intergrated switcher and automatic Day/Night light compensation. High specification external Camera in metal with sun shield, one way audio and a very wide angle lens, 18 meters of cable with plugs either end, a tilting bracket and fixings.
This new Polestar system has been developed with the patented Line Lock system to eliminate picture roll when switching camera, it is a major way forward to reduce eye strain and has all the features normally found on expensive professional systems.
The easy to install system has no complicated set up procedures, the monitor has a bracket which can accomodate the monitor at almost any angle. The monitor can be either plugged into the cigarette lighter or wired into reversing light so it comes on automatically when reverse gear is selected. It adjusts automatically to 12V DC or 24V DC vehicles. The metal encased camera has a very wide angle lens with adjustable bracket, audio and a unique reversable picture switch which imitates a picture in a normal rear view mirror. The monitor has a volume, brightness, contrast controls and an On-Off standby switch with video and audio sockets for Video recording and playback.
Monitor 5.5" with line lock. Uses DC 12V or 24V power. Can be automatically activated when vehicle is shifted into reverse. Sun Hood provided. On-Off standby switch. Camera Built-in microphone. Reduced "bloom" distortion from reflected sunlight or headlights. Specifications: Power Requirements 12 V DC Resolution 700 Lines Power Connector Red - 12V Input Black - Ground Blue - Reverse Gear Switch/Fuse Size : AGC 2 Power Consumption 12.5W Camera Input 2 Speaker Internal Picture White & Black Screen Non-Glare Net Weight 6 1/2 lbs Size 5.5" X 5" X 7" Camera Specifications: Power Requirements 12 V DC Image Pickup Device 1/3" solid state image sensor interline transfer type CCD. Lens 2.1 mm Scanning System 525 Lines/60 Fields Sync System Internal Resolution More Than 380 TV Lines Minimum Illumination 0.03 LUX/F 1.4 Signal to Noise Ratio More Than 45Db 4-Pin Multiconnector 1. DC Input 2. Video Output 3. Ground 4. Audio Output Power Consumption 11 OMA Max Scan Frequencies 15.734 KHz/60 Hz Viewing Angle 110° Horizontal, 90° Vertical Microphone Waterproof Operating Temperature -20°C TO 55°C Water Proof Net Weight 1.25 lbs Size 3.75" x 2" x 3"
Dimensions
Weight: 10 lbs.
Dimensions: 5.5" (L) x 5" (W) x 7" (H)
Warranty information
Warranty terms: 1 Year
The complete package, ready to use system is supplied with all the neccessary fittings. Mount the camera, plug in and switch on!
The System includes a high resolution 5.5" Dash mount or overhead quick start Monitor with a 2 camera intergrated switcher and automatic Day/Night light compensation. High specification external Camera in metal with sun shield, one way audio and a very wide angle lens, 18 meters of cable with plugs either end, a tilting bracket and fixings.
This new Polestar system has been developed with the patented Line Lock system to eliminate picture roll when switching camera, it is a major way forward to reduce eye strain and has all the features normally found on expensive professional systems.
The easy to install system has no complicated set up procedures, the monitor has a bracket which can accomodate the monitor at almost any angle. The monitor can be either plugged into the cigarette lighter or wired into reversing light so it comes on automatically when reverse gear is selected. It adjusts automatically to 12V DC or 24V DC vehicles. The metal encased camera has a very wide angle lens with adjustable bracket, audio and a unique reversable picture switch which imitates a picture in a normal rear view mirror. The monitor has a volume, brightness, contrast controls and an On-Off standby switch with video and audio sockets for Video recording and playback.
Monitor 5.5" with line lock. Uses DC 12V or 24V power. Can be automatically activated when vehicle is shifted into reverse. Sun Hood provided. On-Off standby switch. Camera Built-in microphone. Reduced "bloom" distortion from reflected sunlight or headlights. Specifications: Power Requirements 12 V DC Resolution 700 Lines Power Connector Red - 12V Input Black - Ground Blue - Reverse Gear Switch/Fuse Size : AGC 2 Power Consumption 12.5W Camera Input 2 Speaker Internal Picture White & Black Screen Non-Glare Net Weight 6 1/2 lbs Size 5.5" X 5" X 7" Camera Specifications: Power Requirements 12 V DC Image Pickup Device 1/3" solid state image sensor interline transfer type CCD. Lens 2.1 mm Scanning System 525 Lines/60 Fields Sync System Internal Resolution More Than 380 TV Lines Minimum Illumination 0.03 LUX/F 1.4 Signal to Noise Ratio More Than 45Db 4-Pin Multiconnector 1. DC Input 2. Video Output 3. Ground 4. Audio Output Power Consumption 11 OMA Max Scan Frequencies 15.734 KHz/60 Hz Viewing Angle 110° Horizontal, 90° Vertical Microphone Waterproof Operating Temperature -20°C TO 55°C Water Proof Net Weight 1.25 lbs Size 3.75" x 2" x 3"
Dimensions
Weight: 10 lbs.
Dimensions: 5.5" (L) x 5" (W) x 7" (H)
Warranty information
Warranty terms: 1 Year
Have a Question? Please Email me at dmckay@dan-marc.com or give me a call during regular business hours (Eastern time) at 330-556-5080 Or Toll Free (844)978-PART (978-7278)Thanks.. Dan
