Intellitec Battery Disconnect Relay

Intellitec Battery Disconnect Relay
Item# 31-0100055000
Regular price: $74.82
Sale price: $67.87
Availability: Usually ships the next business day

Product Description

Battery Disconnect Relay

Battery Disconnect provides a simple and safe means of remotely disconnecting batteries of an RV or boat. With a touch of a remote switch, the batteries will be completely disconnected, preventing unwanted drain when the RV or boat are put into storage.

The heart of the system is a unique latching relay developed specifically for this purpose. While this relay is capable of carrying heavy currents, it requires NO power to stay open or closed. It only draws power during activation. The relay is sealed against the environments and is designed to withstand the shock and vibration experienced in the most severe RV or boat applications.

THE RELAY - How it Works

The Battery Disconnect Relay is a mechanically latching switch that operates by the momentary application of battery voltage to the coil terminals in one direction for latching (closed) or the other direction for unlatching (open).

To close the relay, +12 volts is applied to the "I" terminal and ground the "S" terminal of the relay. When this is done, the plunger is pulled into the coil and the contacts are connected. While this happens, the rod magnet suspended above the plunger is attracted (opposite poles attract) to the top of the plunger by the magnetic field.

When the voltage is removed from the coil, the plunger gets pushed upward by the return spring, but cannot move because the rod magnet is in the way.

To open the relay, +12 volts is applied to the "S" terminal and ground on the "I" terminal. When this is done, the plunger is again pulled into the coil. However, since the magnetic polarity of the coil is reversed, the rod is repelled (like poles oppose), and swings out of the way.

When the voltage is removed from the coil, the plunger gets pushed upwards by the return spring, breaking the connection between the two large terminals.

FUSES

There are two 5 Amp fuses for the system, mounted on each relay. Looking at the relay with cap at the top, the fuse on the right feeds the LED indicator and if so equipped, the digital voltmeter. The fuse on the left feeds the power to the switch that operates the solenoid.

Specifications:

Relay Actuation Voltage 10.5 Volts

Continuous Carry Current 100 Amps max.

Short Term Carry Current 500 Amps (30 seconds max.)

 

Have a Question? Please Email me at dmckay@dan-marc.com or give me a call during regular business hours (Eastern time) at 330-556-5080 Or Toll Free (844)978-PART (978-7278)Thanks.. Dan