INTELLITEC'S BATTERY GUARD system prevents "dead batteries" by disconnecting the battery before it is completely drained and cannot start the vehicle. It is designed to be used in vehicles with 24 volt electrical systems. The system consists of an Intellitec 24V Battery Disconnect Relay (P/N 01-00055-006), the 24V Battery Guard Controller (P/N 00-00333-000), and a 2 Pin/3 Pin/6 Pin wiring harness.
The heart of the system is the unique 24V Battery Disconnect Relay that has been used by the RV industry for several years. This rugged, latching relay is capable of carrying heavy vehicle currents even though it requires no power to maintain its open or closed positions.
Low Voltage Sensing - Battery Guard senses the battery voltage to determine condition of charge. When the voltage is low for four minutes, the battery will be disconnected.
Dash Mount Reset Switch - When the battery has been disconnected, it can be reconnected by pressing the Battery Guard Reset Switch.
Disconnect Indicator - The Switch LED will blink to indicate that the battery has been disconnected.
Automatic Re-connect - When the voltage rises above normal, as with a "jump start" or connection of a charger, the battery will automatically be re-connected.
Ignition Override - When the ignition switch is turned on, the unit will not disconnect the battery, regardless of the voltage level.
System Test Switch - There is a "Test" switch on the Controller that allows testing of the completed installation.
Disconnect Bypass - A terminal on the Controller provides constant battery power to the radio or phone memory, or as a solar panel connection.
Includes relay, wiring, and hardware needed to install.
Continuous Carry Current 100 Amps
Standby Current Less than 1 Milliamp
Some items in kit are not available in stock for replacement. They must be special ordered.
Have a Question? Please Email me at firstname.lastname@example.org or give me a call during regular business hours (Eastern time) at 330-556-5080 Or Toll Free (844)978-PART (978-7278)Thanks.. Dan