Provides 2500 watts of sine wave AC power from a DC source and multistage battery charging.
The Prosine 2.5 inverter/chargers offer a powerful all-in-one solution, delivering unsurpassed clean true sine wave electrical power for all types of appliances along with technologically superior three-stage charging for longer battery life. Offering a revolutionary technology and power to weight ratio, Xantrex Prosine technology is the benchmark for premium integrated power systems.
2500 watt inverter, 50 A surge capability
Power factor corrected multistage charger.
True sine wave output (crystal controlled).
Built-in 30 A transfer switch automatically transfers between inverter power and incoming AC power.
Equalization mode conditions batteries for longer life.
Power sharing prevents tripping of shorepower breaker.
Compact, lightweight, and easy to install.
Includes remote panel and battery temperature sensor.
Over voltage and under voltage protection.
Over temperature protection and automatic overload protection.
Short circuit AC backfeed protection.
DC wiring box for residential home installation.
GFCI-equipped AC wiring box.
Prosine 2.5 Remote Panel (included).
Independent inverter and charger on/off controls.
LED bar graph display of DC volts and amps.
LED fault diagnostics.
Electrical Specifications - Inverter:
Output power (continuous) 2500 watts
Surge rating (5 seconds) 4000 watts
Output current (peak) 50 A
Output voltage (at no load) 120 VAC +/- 3%
Output voltage (over full load and battery voltage range) 120 VAC RMS -10% / +4%
Output frequency 60 Hz +/- 0.05% (crystal controlled)
Output waveform True Sine Wave <5% THD
Peak efficiency 88%
No load current draw (search mode) <3 W
No load current draw (with inverter on) <60 W
Input DC voltage range 10 - 16 VDC
Electrical Specifications - Charger:
Charger rate 100 A
Output voltage (nominal depending of settings)
Charge 13.8 - 14.8 VDC
Float 13.1 - 14.2 VDC
Equalize 14.0 - 18.0 VDC
Charge control 3 stage with manual equalize
Charge temperature compensation 3 settings or optional sensor
AC input power factor (charger on) 0.99
Input AC voltage range 90- 135 VAC
Compatible battery types Flooded / Gel
Transfer relay rating 30 A
Transfer time (AC to inverter and inverter to AC) 20 ms typical
Storage temperature -22°F - 158°F (-30C - 70°C)
Operating temperature range 32°F - 140°F (0°C - 60°C)