400 watt DC to AC Power Inverter with Transfer Relay - Hardwire/GFCI
Product Description
400 watt DC to AC Power Inverter with Transfer Relay - Hardwire/GFCI
The Xantrex HI 400 converts DC power into modified sine wave AC power. With a 400-watt continuous output and 550-watt surge, the unit is ideal for running TVs, stereos, laptop and desktop computers and other sensitive electronics. The inverter provides a well-regulated modified sine wave AC output, resulting in TV picture reception and audio amplification.
Product Features:
Runs AC powered products up to 400 watts.
Modified sine wave output minimizes distortion on TV picture reception and audio amplification.
AC transfer switch will automatically transfer to and from shorepower depending on its availability.
CSA/NRTL approved to UL 458
Protection Features:
Ignition lockout: when connected, this circuit automatically turns the inverter off when it senses the presence of 12 VDC power.
Ground Fault Circuit Interruption (GFCI) protection: optional model #80-0400-12 incorporates a GFCI receptacle to protect the output from a potential ground fault.
High and low DC voltage shutdown with automatic reset.
Over-temperature shutdown with automatic reset.
AC overload shutdown.
Options:
Optional duplex GFCI AC receptacle.
Electrical Specifiactions:
Output power (continuous) 400 W (maximum)
Surge capacity (peak) 550 W
Output voltage 120 VAC +/- 5%
Output frequency 60 Hz +/- 0.1% crystal controlled
Output waveform Modified sine wave
Peak efficiency 80%
Nominal DC voltage 12 VDC
Input voltage range 10.0 - 15.0 VDC
AC transfer input 120 VAC, 60 Hz, 4 A
No load current draw 50 A maximum
DC input current <400 mA
AC receptacle Duplex GFCI
Regulatory Approvals
CSA/NRTL Certified to UL 458 standard
Input
Range: 120 VAC
Current: 4 Amps
Output
Voltage: 120 VAC
Current: 3.3 Amps
Frequency: 60 Hz
Power: 400 Watts
Have a Question? Please Email me at dmckay@dan-marc.com or give me a call during regular business hours (Eastern time) at 330-556-5080 Thanks.. Dan